
Auto Forward - Reverse Cycling Motor Control - 12 Volt DC
Additional Notes:
* Programmable timed control for motors & other cyclic uses.
* Set Forward & Reverse running time.
* Isolated Relay wired to reverse the polarity of the relay DPDT contacts.
* Cycles Forward/Reverse as long as Board is Powered.
* NOTE: Load Power must be removed to Stop motion, Removing Circuit Power stops the timmed cycle leaving motor running continous in one direction.
* Load Power/Circuit Power are isolated
* Circuit Working Voltage: DC 5-13 Volt
* Working Current: 5 Volt : Forward: ~4ma/Reverse: ~36ma
* 12 Volt : Forward: ~6ma/Reverse: ~44ma
* Relay Load Rating: 30 Volt DC @ 2 Amp Max or 125 Volt AC @ 1 Amp Max.
* Recommend 5-12 Volt DC Motor <2 Amp
* Run time set by programming & 3 jumper selections for X1 to X8 running. X multiplier is same for both directions Forward & Reverse base time are independent
* Forward time: up to ~5000 sec. (X1) to ~40000 (X8)
* Reverse time: up to ~5000 sec. (X1) to ~40000 (X8)
* Terminal Strips for Circuit (Board) Power, Load Power & Load
* L: 2-1/8" x W: 7/8" x H: 5/8"
MPJA
37217 RL
- CodistoAmazon:
- 0.0000