In stock
Only 35 left
SKU
007625

TowerPro SG90 Micro Servo, Arduino Compatible

$6.95

Servo Mini 9G Good for Beginners DIY Projects,
Arduino Compatible Steering Gear for RC Helicopter, Drone, Car and Boat

TowerPro SG90 Micro Servo, Arduino Compatible

Description:
This Servo Motor works well for basic servo experimentation and can be used in applications where small size is a virtue and that don’t require a huge amount of torque.
Gears are nylon which is the case with most lower cost Servos.
Servo motors can be commanded to go to a specific position, such as for turning the front wheels on an RC model for steering or pivoting a sensor on a robotic vehicle.

Key Features of SG90:
Very small micro size
Can lift 3.75 lb positioned 1 cm from center of shaft
Servo can rotate approximately 180 degrees (90 degree in each direction)
Analog drive

Specifications:
Dimensions (L x W x H) = 0.91 x 0.48 x 1.14 inch (23.0 x 12.2 x 29 mm)
Weight = 0.32 ounces (9 grams)
Weight with wire and connecter = 0.37 ounce (10.6 grams)
Stall Torque at 4.8 volts = 22.2 oz/in (1.6 kg/cm)
Operating Voltage = 4.0 to 6.0 volts
Operating Speed at 4.8 volts (no load) = 0.12 sec/ 60 degrees
Connector Wire Length = 9.5 inches (24.13cm)
Universal "S" type connector fits most receivers
The wire colors are: Red = battery positive, Brown = battery negative, Orange = PWM signal

Package Includes:
1 SG90 Servo motor with attached 9.5" control cable
3 arms/horns for various interface applications
3 screws for mounting arms to the servo and mounting the servo

Towerpro
SG90

More Information
Part Number 58573
Description

TowerPro SG90 Micro Servo, Arduino Compatible

Description:
This Servo Motor works well for basic servo experimentation and can be used in applications where small size is a virtue and that don’t require a huge amount of torque.
Gears are nylon which is the case with most lower cost Servos.
Servo motors can be commanded to go to a specific position, such as for turning the front wheels on an RC model for steering or pivoting a sensor on a robotic vehicle.

Key Features of SG90:
Very small micro size
Can lift 3.75 lb positioned 1 cm from center of shaft
Servo can rotate approximately 180 degrees (90 degree in each direction)
Analog drive

Specifications:
Dimensions (L x W x H) = 0.91 x 0.48 x 1.14 inch (23.0 x 12.2 x 29 mm)
Weight = 0.32 ounces (9 grams)
Weight with wire and connecter = 0.37 ounce (10.6 grams)
Stall Torque at 4.8 volts = 22.2 oz/in (1.6 kg/cm)
Operating Voltage = 4.0 to 6.0 volts
Operating Speed at 4.8 volts (no load) = 0.12 sec/ 60 degrees
Connector Wire Length = 9.5 inches (24.13cm)
Universal "S" type connector fits most receivers
The wire colors are: Red = battery positive, Brown = battery negative, Orange = PWM signal

Package Includes:
1 SG90 Servo motor with attached 9.5" control cable
3 arms/horns for various interface applications
3 screws for mounting arms to the servo and mounting the servo

Towerpro
SG90

Brand -- Please Select --
Write Your Own Review
You're reviewing:TowerPro SG90 Micro Servo, Arduino Compatible

California Residents: WARNING Proposition 65

(This item manufactured prior to August 31, 2018)

To Top