3/4 Inch NPT Liquid Tight Conduit Fitting

$44.95

90 Degree 3/4 Inch Heyco-Flex Liquid Tight Conduit Fitting
50 Pack

  • Buy 2 for $40.46 each and save 10%
  • Buy 5 for $38.21 each and save 15%
  • Buy 10 for $35.96 each and save 20%
In stock
Only 10 left
SKU
008807

3/4 Inch NPT Liquid Tight Conduit Fitting, 50 Pack

3/4 Inch Heyco-Flex Liquid Tight Conduit Fittings
For Flexible, Nonmetallic Liquid Tight Heyco-Flex I Conduit and Heyco-Flex II Tubing
90 Degree Sweep, NPT Hubs
Smooth internal surfaces for easier wire installation around corner angles.
No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut.
This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
Convex ferrule ensures liquid tight seal.
No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
Complete conduit/connector system is reusable
Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
Protection class IP 68, up to 70 psi (5 bar) water pressure.
Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
Resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification and testing.)
Use of a sealing washer may be required for wet locations.
If using a tapped hole, Teflon tape is needed on the threads of the connector

Heyco
8428

More Information
Part Number 8428-50PK
Description

3/4 Inch NPT Liquid Tight Conduit Fitting, 50 Pack

3/4 Inch Heyco-Flex Liquid Tight Conduit Fittings
For Flexible, Nonmetallic Liquid Tight Heyco-Flex I Conduit and Heyco-Flex II Tubing
90 Degree Sweep, NPT Hubs
Smooth internal surfaces for easier wire installation around corner angles.
No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut.
This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
Convex ferrule ensures liquid tight seal.
No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
Complete conduit/connector system is reusable
Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
Protection class IP 68, up to 70 psi (5 bar) water pressure.
Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
Resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification and testing.)
Use of a sealing washer may be required for wet locations.
If using a tapped hole, Teflon tape is needed on the threads of the connector

Heyco
8428

Brand -- Please Select --
UPC 0799632703211
Write Your Own Review
You're reviewing:3/4 Inch NPT Liquid Tight Conduit Fitting

California Residents: WARNING Proposition 65

(This item manufactured prior to August 31, 2018)

To Top
Only 10 left