Switch Float Electronic 12-36 Volt 15 Amp Positive

$7.95
Solid State, Electronic Bilge Pump Switch
Rated 12-36 Volt DC, 15 Amps
Positive Switching Circuit
  • Buy 10 for $7.16 each and save 10%
In stock
Only 282 left
SKU
000777

Electronic Bilge Pump Switch, Positive Switching

The Bilge-Mate is a solid state, automatic, electronic bilge pump switch designed to relpace mechanical float switches.
Simply connect the wires of the 2.5 foot cable provided and place the Bilge-Mate into the lowest portion of the bilge to be pumped.
It will operate in any position, automatically monitoring the level of water in your bilge, switching the pump on and turning it off when empty.
No mechanical parts to fail, foul or jam. Built-in delay prevents false operation.
It will work in the cleanest or nastiest of bilges.
Impervious to oil, gas, diesel or other contaminates found in bilges.
Rated 12-36 Volt DC, 15 Amps, wait state draws only 2 mA
When the bilge water level touches the stainless steel sensors, the pump is activated after a 20-30 second delay.
The pump runs while the sensors are wet and continues for 15-20 seconds after the sensors are dried.
Dimensions: 2.75" (L) x 2.75" (W) x 2.38" (H)
Power Cord 2.5 Foot Length
Positive Switching Circuit, Wiring Diagram Included

Features:
• Maintenance free
• No moving parts
• Easy installation
• No mounting required
• Eliminates pump cycling due to boat movement
• Maintenance free
• Potted solid state electronics / hermetically sealed
• Meets/exceeds ABYC, NMMA, USCG standards

Bocatech Inc
BTBIMA-pos

More Information
Part Number BTBIMA-P
Description

Electronic Bilge Pump Switch, Positive Switching

The Bilge-Mate is a solid state, automatic, electronic bilge pump switch designed to relpace mechanical float switches.
Simply connect the wires of the 2.5 foot cable provided and place the Bilge-Mate into the lowest portion of the bilge to be pumped.
It will operate in any position, automatically monitoring the level of water in your bilge, switching the pump on and turning it off when empty.
No mechanical parts to fail, foul or jam. Built-in delay prevents false operation.
It will work in the cleanest or nastiest of bilges.
Impervious to oil, gas, diesel or other contaminates found in bilges.
Rated 12-36 Volt DC, 15 Amps, wait state draws only 2 mA
When the bilge water level touches the stainless steel sensors, the pump is activated after a 20-30 second delay.
The pump runs while the sensors are wet and continues for 15-20 seconds after the sensors are dried.
Dimensions: 2.75" (L) x 2.75" (W) x 2.38" (H)
Power Cord 2.5 Foot Length
Positive Switching Circuit, Wiring Diagram Included

Features:
• Maintenance free
• No moving parts
• Easy installation
• No mounting required
• Eliminates pump cycling due to boat movement
• Maintenance free
• Potted solid state electronics / hermetically sealed
• Meets/exceeds ABYC, NMMA, USCG standards

Bocatech Inc
BTBIMA-pos

Brand -- Please Select --
Write Your Own Review
You're reviewing:Switch Float Electronic 12-36 Volt 15 Amp Positive

California Residents: WARNING Proposition 65

(This item manufactured prior to August 31, 2018)

To Top
Only 282 left