In stock
Only 1 left
SKU
008974

EasyDriver Bipolar Stepper Motor Driver

$6.95
A3967SLBT Microstepping Driver Great for DIY Arduino Projects
  • Buy 10 for $6.26 each and save 10%
  • Buy 25 for $6.12 each and save 12%

EasyDriver Bipolar Stepper Motor Driver for Arduino

The EasyDriver is a simple to use stepper motor driver.
Compatible with anything that can output a 
digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
EasyDriver 
requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
The 
EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V.
Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!
EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution.
The sleep and enable pins are also broken out for further control.

Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.

Features:
• A3967 microstepping driver
• MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth 

More Information
Part Number RP8974
Description

EasyDriver Bipolar Stepper Motor Driver for Arduino

The EasyDriver is a simple to use stepper motor driver.
Compatible with anything that can output a 
digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
EasyDriver 
requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
The 
EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V.
Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!
EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution.
The sleep and enable pins are also broken out for further control.

Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.

Features:
• A3967 microstepping driver
• MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth 

Brand -- Please Select --
Write Your Own Review
You're reviewing:EasyDriver Bipolar Stepper Motor Driver

California Residents: WARNING Proposition 65

(This item manufactured prior to August 31, 2018)

To Top