In stock
SKU
006951

3/4" NPT Liquid Tight Conduit Fitting

$2.75
90 Deg. Grey NPT Conduit Fitting

3/4" NPT Liquid Tight Conduit Fitting

3/4 Inch Heyco-Flexâ„¢ Liquid Tight Conduit Fittings
For Flexible, Nonmetallic Liquid Tight Heyco-Flex I Conduit and Heyco-Flex II Tubing
90° Sweep, NPT Hubs

Smooth internal surfaces for easier wire installation around corner angles.
• No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
• Convex ferrule ensures liquid tight seal.
• No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
• Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
• Protection class IP 68 up to 70 psi (5 bar) water pressure.
• Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
• Resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification and testing.)
• Use of a sealing washer may be required for wet locations.
• If using a tapped hole, Teflon® tape is needed on the threads of the connecto

Write Your Own Review
You're reviewing:3/4" NPT Liquid Tight Conduit Fitting

California Residents: WARNING Proposition 65

(This item manufactured prior to August 31, 2018)

To Top